Auto Vertical EPS Block Moulding Machine

1.Machine structure:
a, The machine mould are welded by strong rectangle tube and steel plate with high strength frame, keep more safety;
b, All block mould frames are treated by heat-treatment to release the welding stress, so that the frames would not deformed;
c, After heating treatment, all mould frames are processed by sand blasting treatment to get rust prevention, so under
coat and finishing coat are greatly improved anticorrosion performance and long life;
d, Adopts three Germany gauges and safety valve for double protection, the machine will be water pressure and steam
many testing, ensure the machine more stable and safety.
2. Steam system: Three ball valves, comparing one big steam valve, saves 20% steam, with ISO-standard butterfly valves, greatly improve stability and long life;
3. Control system:
a, Adopts PLC(Mitsubishi) and touch screen (Schneider) with easily operation;
b, Equipped material level sensor to control the filling. The block cooling is controlled by foam pressure sensor; The whole procedure for filling, heating, cooling will automatically by PLC.
4. Vertical frame type: Less floor occupied, with good drainage performance, reduced low moisture content of blocks

Item		LWB2000L	LWB3000L	LWB4000L	LWB6000L
Mould Cavity Size		2040*1240*1030(mm)	3060*1240*1030(mm)	4080*1240*1030(mm)	6100*1240*1030(mm)
Block Size		2000*1200*1000(mm)	3000*1200*1000(mm)	4000*1200*1000(mm)	6000*1200*1000(mm)
Steam	Entry Consumption Pressure	DN150 25~35kg/cycle 0.6Mpa	DN150 35~50kg/cycle 0.6Mpa	DN200 45~60kg/cycle 0.6Mpa	DN200 75~90kg/cycle 0.6Mpa
Compressed Air	Entry Consumption Pressure	DN40 1.5~2m3/cycle 0.6Mpa	DN40 1.8~2.2m3/cycle 0.6Mpa	DN40 2~2.5m3/cycle 0.6Mpa	DN40 2.5~3m3/cycle 0.6Mpa
Drainage	Vacuum drain Steam vent Condensate Blower outlet	DN200     DN250 DN100 DN200	DN200     DN250 DN100 DN200	DN200     DN250 DN100 DN200	DN200     DN250 DN100 DN200
Throughput	15kg/m3	3-5min/cycle	3-6min/cycle	4-7min/cycle	4-8min/cycle
Connected Load		70KW	70KW	70KW	70KW
Overall Dimension		5500*4500*3800(mm)	5500*4500*3800(mm)	5500*4500*5800(mm)	5500*4500*7800(mm)
Weight		10000kg	12000kg	15000kg	18000kg
Room Height Required		70000mm	70000mm	70000mm	70000mm
Other sizes also avilable

 

LONGWELL, with over 20 years experience, is one of the largest auto vertical block moulding machine manufacturers and suppliers in China. With the help of advanced equipment and technology, all of our products are of high quality and low price. Welcome to buy the cheap customized machine from our factory.