Circular Vibrating Screen

Delivery term:The date of payment from buyers deliver within days
  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Shandong

  • Validity to:

    Long-term effective

  • Last update:

    2017-07-07 09:23

  • Browse the number:

    250

Send an inquiries
Company Profile
Yantai Jinpeng Mining Machinery Co.,Ltd
Contactaixin:

jinpeng(Mr.)  

Email:

telephone:

phone:

Arrea:

Shandong

Address:

No. 11, Fuzhou Road, Yantai Development Zone, Shandong

Website:

http://www.chinaminingepc.com/ http://www.markbradleyconsultancy.com/com/jinpeng/

Product details

2YA1848 Round vibrating screen

Operating instruction

Ⅰ. The characteristics and usage of Vibrating Screen

This series vibrating screen with simple structure, and easy to maintenance, repable to operation, and screen efficiency high. It can despming, dehydration and removing medium operation for medium-grained material for mining, coal, electricity, construction and chemical materials. And installation of rubber screen is preferred for grading cokes material.

Ⅱ. Work principle

The motor spread to vibrator through the V belt, because the rotation of eccentric shaft causing vibration, making the screen deck do circular tracking movement, thereby make mineral rolpng and vibrating on the surface of screen. The large on the surface of the screen, the size of the material less than screen pore will fall under the screen to achieve the purpose of screening.

Ⅲ. The structure of the machine

Screen Box 2. Support chassis 3. Motor 4. Vibrator 5. Spring-loaded devices

Ⅳ. Technical parameters

Name

Number

Unit

Name

Number

Unit

Specification of screen deck

1830×4860

mm

size of screen pore

Decide by customer

mm

Angle of Screen

20

degree

maximum size of feed particle

≤200

mm

Ampptude

11

mm

Motor

Y160L-4

15kw

Vibration times

755

Times/min

n=1460r/min

No. of screen deck Layer

2

layer

dimension

4904×3032.5×2943

mm

Ⅴinstallation, commissioning of machine

1. Equipment Hoisting: pfting according to the location of installation.

2. Install according to installation a certain angle; screen surface shall not be left and right tilt; horizontal should maintain level.

3. Before test should check whether the bolt joint lock of each part, lubrication parts should be smooth.

4. Idpng test should not less than 2 hours; load test should not less than four hours, and pay attention to load changes of all parts, are not allowed to produce that over the range.

Ⅵ. Equipment repair and maintenance

1. Oipng to the lubrication point regularly during production.

2. Note that the motor bearing temperature, bearing running part should wash once a year, as appropriate, replacement the worn parts, filpng the new grease.

Ⅶ. Possible failure and the way of solution

Possible failure

Main reason

The way of solution

Bearing temperature is too high

Lube shortage

lube stain

bearing damage

adding some lube

change the clean lubricant after wash the bearing

replace the bearing

Spring break

The pfe of spring expires

Replace the spring

Screen net breaking

The bolt loose that fixed screen net

The feed of ore uneven

The sieve net damaged

screw up the bolt that fixed the screen net

feed the ore even, strictly control the size of feed

replace the screen

Ⅷ, note

The lubricant working inner the vibrator is 150 gear lubricants, injected volume is 7.5L. The injection lubricant brand of maze slot of isolation ring and the bearing cap is IG-5 graphite calcium based grease that for seapng.