Product details
Features:
● H.264 image compression encoding supported, VM-3004-HYBRID PAL: 200fps@720P,
● Both VM-3004-HYBRID support multi-mode HD video access (see technical specifications for details)
● Air video interface is used to provide high reliability and strong anti-seismic property
● Built-in 3G/4G network, GPS, WiFi (optional)
● Built-in 2.5" HDD, max. 2TB HDD supported, damping technique
● 1 HDMI, 2 CVBS video outputs, maximum 1080P supported
● Good scalability, 1 RS485 interface, 2 RS232 interfaces
● 8V-36V wide voltage DC supply, 12V POE power supply supported
● HDD heating technique supported, operating temperature range -40℃- + 80
Video Input |
Supports 4 channels CIF/HD1/D1/960H/720P AHD camera Video input |
| Supports 4 channels 720P/ 2 channels 1080P IP camera Video input | |
| Supports 2-CH 720P AHD + 2-CH 960H analog mixing Video input | |
| Supports 4-CH 720P IPC + 4-CH 720P AHD/960H/D1/CIF Video input | |
| Supports 2-CH 1080P IPC + 4-CH 720P AHD/960H/D1/CIF Video input | |
Int'l Standard GPS* |
Internal GPS module. Real-time geographic coordinates, speed information |
Internal G-Sensor |
Supports 3 Axis Motion Detection with user set ranges, for X, Y and Z coordinates |
3G* |
3G (HSUPA / HSDPA / WCDMA / EVDO / TD-SCDMA) optional Internal module |
4G* |
4G (TDD-LTE / FDD-LTE) optional module to match local cellular carrier |
Wi-Fi* |
Internal Wi-Fi 802.11b/g/n ( 2.4 / 5.8 Ghz) optional |
1. Installation Environment
● To extend the service life, please try to install the device in a place where vibration is weak;
● To ensure normal heat dissipation, do not install the device in a poorly-ventilated area (such as trunk), and also keep about 15 cm away from other objects on the same level;
● The device shall be horizontally installed and protected against water, humidity and lightning; in addition, keep the vehicle still during installation to prevent damage to the device due to falling off;
● To ensure safe operation, keep the device, camera, cables and other accessories out of reach of passengers and driver.
2. Avoid Electric Shock and Fire
● 8V-36V DC power supply is used for this device. Please note the positive and negative terminals during connection to prevent short circuit;
● Please power the device off before connecting any peripheral ;
● Do not touch the power supply and the device with wet hands;
● Do not spray liquid on the device to prevent internal short circuit or fire;
● Do not place any other device directly on top of the camera;
● Do not disassemble the housing without authorization to avoid damage or electric shock;
3. Transport and Handling
● To prevent incidental damage to the device during transport. Handle the device with due care. The original packaging materials and carton are preferred;
● Power the device off before handling or part replacement to prevent any damage;
http://www.mdvrcamera.com/
